BQGLB - AMYLODEXTRIN MODIFIED STARCH, 1257

  • MSDS: BQGLB
  • Manufacturer: EM SCIENCE
  • Product Name: AMYLODEXTRIN MODIFIED STARCH, 1257
  • National Stock Number: 6810-00N035696
Product Identification

Product ID:AMYLODEXTRIN MODIFIED STARCH, 1257
MSDS Date:03/01/1991
FSC:6810
NIIN:00N035696
MSDS Number: BQGLB

Responsible Party
EM SCIENCE
480 DEMOCRAT RD
GIBBSTOWN, NJ 08027
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 609-354-9200

Cage: DO242

Contractor
EM SCIENCE
70 GIBBSTOWN, NJ 08927 US

Telephone: 800-424-9300 (CHEMTREC)

Cage: DO242

Ingredients

STARCH, SOLUBLE

CAS: 9005-84-9

Fraction By Weight: 100%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DUST MAY BE IRRITATING TO RESPIRATORY
PASSAGES. PROLONGED SKIN CONTACT MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS.

First Aid

First Aid:INGEST: GET IMMEDIATE MEDICAL ATTENTION. SKIN: WASH THORO
WITH SOAP AND WATER. EYES: IMMED FLUSH THORO WITH WATER FOR AT
LEAST 15 MIN. INHAL: REMOVE TO FRESH AIR. INGEST: IF CONSCIOUS,
INDUCE VOMITING .

Fire Fighting

Flash Point:NONE
Extinguishing Media:WATER SPRAY, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AIRBORNE DUST CAN IGNITE/EXPLODE WHEN
EXPOSED TO FLAME.

Accidental Release

Spill Release Procedures:EVACUATE AREA OF ALL UNNEC PERS. WEAR SUITABLE
PROT EQUIP. ELIM ANY IGNIT SOURCES UNTIL AREA IS DETERMINED TO BE
FREE FROM EXPLO/FIRE HAZS. CNTN REL & ELIM ITS SOURCE, IF THIS CAN
BE DONE W/OUT RISK. TAKE UP & CONTAINERIZE FOR PROPER DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE AWAY FROM
STRONG OXIDIZERS. DO NOT BREATHE DUST. DO NOT GET IN EYES. AVOID
PROLONGED OR REPEATED SKIN CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:MATL SHOULD BE HNDLD/TRANSFERRED IN AN APPRVD FUME
HOOD/W/ADEQ VENT.
Protective Gloves:NATURAL RUBB, NEOPRENE, PVC/EQUIVALENT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH & SAFETY EQUIPMENT SHOULD BE
READILY AVAILABLE.
Work Hygienic Practices:WASH THORO AFTER HANDLING. DO NOT TAKE
INTERNALLY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:DECOMP
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE POWDER

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:EXTREME HEAT; CONTACT WITH IGNITION
SOURCE; DUSTING.
Hazardous Decomposition Products:OXIDES OF CARBON.

Disposal

Waste Disposal Methods:COMPLY WITH FEDERAL, STATE, AND LOCAL
REGULATIONS ON REPORTING RELEASES. REFER TO REGULATORY INFORMATION
FOR REPORTABLE QTY AND OTHER REGULATORY DATA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.